We help people repair plastic
Polyvance is closed for the holiday. We will reopen Monday, December 30.
Information
How to Install the Ceramic Heater Core into the Airless Plastic Welder Element.
The image below is an exploded view of the element assembly. Scroll down for step-by-step instructions.
6012C Installation video
Step 1
Remove the large nut at the base of the barrel and slide the barrel off of the assembly.
Step 2
The spacer and heat transfer sleeve slide off.
Step 3
Remove the 3 screws that hold the base plate to the handle.
Step 4
Unplug the green ground wire from the grounding spring.
Step 5
Push the locking lever to unhook the ceramic heater core and unplug the ceramic heater core from the power lines.
To reassemble, reverse these steps.
plastic welding supply plastic welding strips thermal welding plastic best plastic welder platic welding
Product Suggestions
