Introducing the 8000 Series Nitro-Fuzer Welders

From the industry's leader in nitrogen plastic welding, Polyvance is proud to introduce the newest generation of welders, the 8000-series. The 8000-series incorporates all of the user-friendly features we've developed over the years since we introduced the first nitrogen welder in 2006.

We are introducing eight new welders in the 8000-series at launch, so we can offer a nitrogen welder for every shop and every budget. Four different welders are available as kits complete with carts -- two with digital temperature control and two with analog control. Each level of welder is available for use with a nitrogen tank or with a nitrogen generator. Each of the 8000-series welders are also available without a cart for shops that prefer to set up a designated plastic repair workstation.

All of the 8000-series welders incorporate patent-pending new technology created by Polyvance to make the welders easier to use and maintain. The exclusive analog flow gauge makes it easy to set the flow of hot nitrogen gas, allowing the user to adjust to thin or thick plastics. The low-pressure cutoff switch automatically protects the heating element from burning out if the flow drops too low. And now all 8000-series welders feature a removable hose and wiring assembly, making it easy to replace the hose or handle if they get damaged.

For ultimate convenience, the models with digital controls come completely assembled and ready to go with the greatest selection of accessories to get you started welding right away. To save cost on the analog models, assembly of the cart will be required.

View the full welder comparison chart here: www.polyvance.com/_pdf/8000-Series-Info-Sheet.pdf

View all our nitrogen plastic welders here: www.polyvance.com/Nitrogen-Welders-1/

For those that have purchased a welder, your Setup and Use video can be found below:

• 8000 - www.polyvance.com/video/products-tools/8000-nitro-fuzer-setup-and-use
• 8001 - www.polyvance.com/video/products-tools/8001-nitro-fuzer-setup-and-use
• 8002 - www.polyvance.com/video/products-tools/8002-nitro-fuzer-setup-and-use
• 8003 - www.polyvance.com/video/products-tools/8003-nitro-fuzer-setup-and-use
• 8200 - www.polyvance.com/video/products-tools/8200-nitro-fuzer-setup-and-use
• 8201 - www.polyvance.com/video/products-tools/8201-nitro-fuzer-setup-and-use
• 8202 - www.polyvance.com/video/products-tools/8202-nitro-fuzer-setup-and-use
• 8203 - www.polyvance.com/video/products-tools/8203-nitro-fuzer-setup-and-use

Check out our training options here: www.polyvance.com/Training-2/ (3 hands-on options, 2 online options)

Always wear proper safety gear while working!

Let us know your thoughts on this video by leaving a comment on YouTube!
Click here: www.youtube.com/watch?v=-Znys1fN85w

Featured Products:

• 8000 Nitro-Fuzer® Nitrogen Plastic Welder (analog, single gas, no cart)
• 8001 Nitro-Fuzer® Nitrogen Plastic Welder (analog, dual gas, no cart)
• 8002 Nitro-Fuzer® Nitrogen Plastic Welder (analog, dual gas, cart assembly required)
• 8003 Nitro-Fuzer® Nitrogen Plastic Welder (analog, single gas, cart assembly required, generator included)
• 8200 Nitro-Fuzer® Nitrogen Plastic Welder (digital, single gas, no cart)
• 8201 Nitro-Fuzer® Nitrogen Plastic Welder (digital, dual gas, no cart)
• 8202 Nitro-Fuzer® Nitrogen Plastic Welder (digital, dual gas, cart fully assembled)
• 8203 Nitro-Fuzer® Nitrogen Plastic Welder (digital, single gas, cart fully assembled, generator included)

Video Notes:

• English Closed Captions have been provided for this video. Click on the CC button to turn them on or off.
• The length of this video is in no way representative of the actual time required to perform a complete repair and therefore should not be used for estimating purposes.

Music Credits:

• "Super Friendly" Kevin MacLeod (incompetech.com)
  Licensed under Creative Commons: By Attribution 3.0 License
  http://creativecommons.org/licenses/by/3.0/
• "Wallpaper" Kevin MacLeod (incompetech.com)
  Licensed under Creative Commons: By Attribution 3.0 License
  http://creativecommons.org/licenses/by/3.0/

English Transcript:

From the industry's leader in nitrogen plastic welding, Polyvance is proud to introduce the newest generation of welders, the 8000-series. The 8000-series incorporates all of the user-friendly features we've developed over the years since we introduced the first nitrogen welder in 2006.

We are introducing eight new welders in the 8000-series at launch, so we can offer a nitrogen welder for every shop and every budget. Four different welders are available as kits complete with carts -- two with digital temperature control and two with analog control. Each level of welder is available for use with a nitrogen tank or with a nitrogen generator.

Each of the 8000-series welders are also available without a cart for shops that prefer to set up a designated plastic repair workstation.

All of the 8000-series welders incorporate patent-pending new technology created by Polyvance to make the welders easier to use and maintain. The exclusive analog flow gauge makes it easy to set the flow of hot nitrogen gas, allowing the user to adjust to thin or thick plastics. The low-pressure cutoff switch automatically protects the heating element from burning out if the flow drops too low. And now all 8000-series welders feature a removable hose and wiring assembly, making it easy to replace the hose or handle if they get damaged. All of these features and more make Polyvance's nitrogen plastic welders the industry's most fully featured and versatile.

For ultimate convenience, the models with digital controls come completely assembled and ready to go with the greatest selection of accessories to get you started welding right away. To save cost on the analog models, assembly of the cart will be required.

A Polyvance nitrogen plastic welder will allow you to repair many of the damaged plastic parts you are currently discarding. Of course, plastic bumper covers are the most common opportunity for repair, but it's not just for bumpers. Use the welder to repair headlight tabs, washer bottles, fender liners, rocker panel moldings, and virtually any other plastic part on the vehicle. Repairing plastic can often create more profit for the shop and technician while reducing the cost of repair and cycle time. Also, repairing plastics is good for the environment, keeping damaged plastics out of the landfill.

Polyvance is the world's leader in plastic welding rods, with a great variety of plastic materials, profiles, and colors, allowing you to fusion weld virtually any plastic used on today's high-tech vehicles.

Polyvance is an I-CAR Sustaining Partner and offers several available hands-on and online training courses which include I-CAR continuing education credits. Check out all of Polyvance's training options at polyvance.com.

Polyvance's 8000-series nitrogen plastic welders are the best way for your shop to increase profit and improve cycle time by repairing damaged plastic parts. Ask your jobber or equipment distributor for more information on Polyvance nitrogen plastic welders, or call Polyvance at 800-633-3047.